230.21.1075.013 Type 21/1200. Standard 5 Slewing Ring Bearings
With over 10170 full-service stores, our 48.6 G2 - Heat Generation Factor (Rib-Roller End) 230.21.1075.013 Type 21/1200. Standard 5 Slewing Ring Bearings China 608zz Bearing Supplier inventory is extensive and our parts are priced right. within 24 hours. METRIC Design Units This helps 163.5 G1 - Heat Generation Factor (Roller-Raceway) you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: | Standard 5 |
| Model Number: | 230.21.1075.013 Type 21/1200. |
| G1 - Heat Generation Factor (Roller-Raceway): | 163.5 |
| Design Units: | METRIC |
| G2 - Heat Generation Factor (Rib-Roller End): | 48.6 |
| r - Cup Backface To Clear Radius2: | 3.05 mm |
| Series: | JT9000 |
| Aa - Cage-Cone Backface Clearance: | 2.3 mm |
| C0 - Static Radial Rating: | 386000 N |
| B: | 42.000 mm |
Product Details
| G1 - Heat Generation Factor (Roller-Raceway) | 163.5 |
| Design Units | METRIC |
| G2 - Heat Generation Factor (Rib-Roller End) | 48.6 |
| r - Cup Backface To Clear Radius2 | 3.05 mm |
| Series | JT9000 |
| Aa - Cage-Cone Backface Clearance | 2.3 mm |
| C0 - Static Radial Rating | 386000 N |
| B | 42.000 mm |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 72300 N |
| Cup Part Number | JT9010 |
| C - Cup Width | 34 mm |
| d | 90 mm |
| Db - Cup Backface Backing Diameter | 132.08 mm |
| e - ISO Factor8 | 0.55 |
| Cone Part Number | JT9049 |
| Da - Cup Frontface Backing Diameter | 145.03 mm |
| Y - ISO Factor9 | 1.1 |
| da - Cone Frontface Backing Diameter | 100.08 mm |
| a - Effective Center Location3 | -0.8 mm |
| Ab - Cage-Cone Frontface Clearance | 4.3 mm |
161.45.2366.891.41.1503 Standard 5 Slewing Ring Bearings
161.45.2366.890.11.1503 Standard 5 Slewing Ring Bearings
192.32.2500.990.41.1502 Standard 5 Slewing Ring Bearings
92.50.2446.990.41.1502 Standard 5 Slewing Ring Bearings
92.40.2395.991.41.1502 Standard 5 Slewing Ring Bearings
92.40.2395.990.11.1502 Standard 5 Slewing Ring Bearings