| 68795A Franke Slewing Ring Bearings | F:155 mm; Mass inner ring:0.92 kg; B:35 mm; r, r1,2 min.:1.1 mm; d:140 mm; |
| 77286B Franke Slewing Ring Bearings | Maximum static radial loads F0r max.:1220 kN; Basic static load rating C0:1340 kN; D1 ≈:190 mm; H max.:80 mm; b:10.7 mm; Basic dynamic load rating C:809 kN; Maximum dynamic radial loads Fr max.:850 kN; r min.:3 mm; B:160 mm; K:5 mm; Mass bearing:55.5 kg; d:120 mm; C:158 mm; D:280 mm; d1 ≈:160 mm; |
| 68961A Franke Slewing Ring Bearings | α:12 °; D:180 mm; dk:160 mm; r2 min.:1 mm; Da max.:172 mm; C:70 mm; da min.:119.5 mm; ra max.:1 mm; rb max.:1 mm; Material constant KM:330; Specific dynamic load factor K:100 N/mm²; b:13.5 mm; B:100 mm; M:6 mm; Sealing solution:Triple-lip seals; Design (sliding contact surface combination):Steel/steel, heavy-d; b1:13.5 mm; Mass plain bearing:11 kg; Da min.:157.5 mm; r1 min.:1 mm; |
| 68623A Franke Slewing Ring Bearings | P60°:39.1 kN; R2:19.05 mm; H:147.637 mm; RG:1/8 NPT; Bearing limiting speed:8000 r/min; A2:115.888 mm; Cap bolt recommended tightening torque:149.1 N·m; da:41.275 mm; H1:76.2 mm; L:269.875 mm; h:36.513 mm; P150°:12.9 kN; Appropriate attachment bolt size G:0.625 in; J max.:228.6 mm; Ca:50.8 mm; Stabilizing ring:2 x SR-1610; Cap bolt, SAE grade:8; P120°:14.2 kN; P180°:15.6 kN; |
| 68661A Franke Slewing Ring Bearings | C:171.6 mm; Maximum dynamic radial loads Fr max.:695 kN; Mass bearing:67.8 kg; K:8 mm; Maximum static radial loads F0r max.:1500 kN; Basic static load rating C0:1500 kN; D1 ≈:203 mm; d:130 mm; B:172.65 mm; H max.:84.988 mm; D:300.02 mm; d1 ≈:201 mm; r min.:2.7 mm; b:15 mm; Fatigue load limit Pu:170 kN; Basic dynamic load rating C:1080 kN; |
| 74116A Franke Slewing Ring Bearings | Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:41500 N; D:125.0000 mm; Sealed Speed Rating n3:3200 rpm; Oil Speed Rating Open/Shielded n2:6300 rpm; Basic Dynamic Radial Load Rating C:50700 N; B:22.00 mm; Accessories:Seal & Snap-Ring; d:80.000 mm; Grease Speed Rating Open/Shielded n1:5300 rpm; |
| 68526A Franke Slewing Ring Bearings | d2:128.5 mm; D1:151.5 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; a:46.8 mm; Number of balls z:20; rb max.:1 mm; Ball diameter Dw:19.05 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor e:0.68; Calculation factor f2B:1.02; Calculation factor (single, tandem) Y2:0.87; Preload class C GC:2600 N; Preload class A GA:650 N; Calculation factor f:1.14; Calculation factor f1:0.99; |
| 68673A Franke Slewing Ring Bearings | H:271 mm; Housing:FSNL 524-620 RU; P0°:800 kN; Eye bolt, size:2 x M 10; Cap bolt, size:M 20x100; N4 max.:8 mm; Q120°:620 kN; Da:215 mm; J1:70 mm; J6:378 mm; Oil seal:2 x TSN 524 U; N:24 mm; A2:203 mm; Pa:260 kN; P150°:320 kN; L:410 mm; Q180°:310 kN; A1:120 mm; Q150°:360 kN; da:110 mm; |