| No. | Brand | G | b | J | A | a | T | U | H |
| CF6VUU | NTN | 49.962 mm | - | - | - | - | - | - | - |
| Cf3 | IKO | - | - | - | - | 80 mm | - | - | - |
| CF30/NUKR80 | - | - | - | - | - | - | - | - | - |
| 1/2 | - | - | - | - | - | - | - | - | - |
| 12 | - | - | - | - | - | - | - | - | - |
| cf8 | - | - | - | - | - | - | - | - | - |
| CF-1 | - | - | - | - | - | - | - | 17 mm | - |
| KR30 | - | - | - | - | - | - | - | - | 140 mm |
| KR47 | - | - | - | - | - | - | - | - | - |
| CF12-1/KR32 | - | - | - | - | - | - | - | - | - |
| CF5 | - | Tr 1000x8 | - | - | 15 mm | - | - | - | - |
| CF-2 | - | - | - | - | - | - | - | - | 258.762 mm |
| CF12 | - | - | 13.9 mm | - | - | - | - | - | - |
| CF16B | IKO | - | - | 148.5 mm | - | - | - | - | - |
| Cf20 | - | - | - | - | - | - | - | - | - |
| CF12 | - | - | - | - | - | - | - | - | - |
| KR32 | - | - | mm | - | - | - | - | - | - |
| CF12-1UU | - | - | - | - | - | - | - | - | - |
| CF04 | - | - | - | - | 34.1 mm | - | 42 mm | - | - |
| CF10VB | - | - | - | - | - | - | - | - | - |
| 2 | - | M 50x1.5 | 6 mm | - | - | - | - | - | - |
| CF3 | - | - | - | - | - | - | - | - | - |
| original germany bolted needle roller bearing KR30 CF12 stud type track rollers KR 30 PPA | B:24.867 mm; Mass adapter sleeve assembly:7.25 kg; d1:133.35 mm; Hydraulic nut:HMVC 30E; G:149.555 mm; Lock nut:AN 30; Lock washer:W 30; Sleeve:S 30x5.1/4; B4:28.575 mm; B1:107.467 mm; |
| Production supply CF10VB CF10V CF10VBUU CF10VUU Metric Stud Type Caged with Hex-Drive Sealed Cam Follower | Permissible sliding velocity v max.:5 m/s; d:15 mm; B:15 mm; Coefficient of friction µ min.:0.05; Mass bushing:0.01 kg; Coefficient of friction µ max.:0.1; D:19 mm; Tolerance shaft:h8; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; |
| Japan THK cam followers track roller bearing CF12 CF12MUUA CF12MUU-A | Oil Speed Rating n2:8000 rpm; Basic Dynamic Radial Load Rating C:37700 N; D:72.0000 mm; Accessories:One Seal & Snap-Ring; Basic Static Radial Load Rating Co:27500 N; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:6000 rpm; Grease Speed Rating n1:6000 rpm; B:30.20 mm; d:35.000 mm; |
| All types of CF12 Stud Type Cam Follower Bearings | Housing:SAFS 028 KA; P180°:107 kN; Initial grease fill:379.89 g; A2:190.5 mm; Labyrinth ring:2 x LOR 122; Bearing limiting speed:3400 r/min; PG:1/4 NPT; RG:1/2 NPT; Cap bolt, SAE grade:8; Stabilizing ring:2 x 36053-50; |
| KR47 Track roller bearing CF20 bolt wheel cam follower bearing | Fillet Radius ra:1.00 mm; d:30.000 mm; Sealed Speed Rating n3:6300 rpm; D:72.0000 mm; Grease Speed Rating n1:6300 rpm; Oil Speed Rating n2:8500 rpm; Basic Dynamic Radial Load Rating C:41600 N; Basic Static Radial Load Rating Co:29000 N; Accessories:Two Shields; B:30.20 mm; |
| Needle Cf20 Cf30 Cf30-1 Cf5 Cf 12 20 30 30-1 5 Cf-20 Cf12 Cam Follower Bearing | Basic Static Radial Load Rating Co:290000 N; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:247000 N; Sealed Speed Rating n3:1100 rpm; Grease Speed Rating Open/Shielded n1:1800 rpm; Accessories:Without Accessories; D:340.0000 mm; d:220.000 mm; B:56.00 mm; Oil Speed Rating Open/Shielded n2:2200 rpm; |
| Factory Source Cheap Cam Follower Bearing CF12-1/KR32 | Basic Dynamic Radial Load Rating C:52700 N; Basic Static Radial Load Rating Co:45000 N; d:85.000 mm; Sealed Speed Rating n3:3000 rpm; D:130.0000 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; Oil Speed Rating Open/Shielded n2:6000 rpm; B:22.00 mm; Accessories:Snap-Ring; Fillet Radius ra:1.00 mm; |
| IKO Cam Follower and Track Roller Bearing CF12-1B CF12-1VBUUR MCFR32SBX | D2 ≈:165.3 mm; r0 max.:0.6 mm; Calculation factor kr:0.025; D:180 mm; r1,2 min.:2 mm; Da max.:171 mm; Basic static load rating C0:80 kN; C:3.71 mm; Basic dynamic load rating C:88.4 kN; da min.:129 mm; |
| CF10/NUKR22 Cam Follower Bearing Bolt Wheel Cam Follower Bearing | d:50.000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:48800 N; Basic Static Radial Load Rating Co:39000 N; B:30.20 mm; D:90.0000 mm; Oil Speed Rating n2:6300 rpm; Sealed Speed Rating n3:4800 rpm; Accessories:No Shield, no Seal,; Grease Speed Rating n1:4800 rpm; |
| CF5 Cam Followers Stud Type Track Roller Bearings | B1:600 mm; G1:70 mm; A:15 mm; Hydraulic nut:HMV 200 E; G:Tr 1000x8; Nut for removal:HM 31/1000; Mass withdrawal sleeve:533 kg; d1:900 mm; G2:G 1/4; B2:620 mm; |
Easy to use and High-performance cam lock screws IKO Cam Follower for industrial use , other brand also available Video